Connectorized cable assemblies are cord-type fiber optical cables terminated with connectors at both ends. The type of cable fiber and connector and the length of the patch cords can be freely specified by the customer as shown below.
> End-Face Type: PC/UPC/APC
> Fiber Diameter: 0.9mm, 2.0mm or 3.0mm
> Available for simplex and duplex
> The outer jacket can be PVC, LSZH, Armored etc
> Available for different connectors: SC, LC, FC, ST, MPO, MTP, MU, DIN, D4, E2K etc
> Fiber Type: Single mode fiber G652D, G657A1 and G657A2, Multimode fiber OM1, OM2, OM3 and OM4 are available
> High speed data transmission network
> High quality graphic transmission network
> Connection of optical transmission equipment
| Part Number:SPP - SC - FC – AA – 2D – 30 – 5V(A) 1 2 3 4 5 6 7 8 9 10
Product Description:Patch Cord Duplex 2×SC/UPC 2× SC/UPC G.652D 3.0mm 5M length PVC Armored |
| 1 - Connector A | LC SC FC ST etc |
| 2 - Connector B | LC SC FC ST etc |
| 3 – End face A | U:UPC polish; P:PC polish; A:APC polish |
| 4 – End face B | U:UPC polish; P:PC polish; A:APC polish |
| 5 - Fiber Count | 1: Simplex; 2: Duplex |
| 6 - Fiber Mode | M1: OM1; M2: OM2; M3: OM3; M3H:OM3(300); M4: OM4; D: G.652D; A1: G657.A1 |
| 7 - Diameter | 09:0.9mm ; 20: 2.0mm ; 30: 3.0mm etc |
| 8 - Length | 5 : Cable total length 5M ; etc |
| 9 - Cable Jacket Materials | V: PVC; H:LSZH; O:OFNR; F:OFNP; Y:PE |
| 10 - Armored | Null: Without armored A: Armored |
| Cable Jacket Color | Default:Aqua ( OM3,OM4) ;Orange (OM1,OM2) ; Yellow (SM) |
Note:
1. Default Connector A - Connector B order in PN: LC-SC LC-FC LC-ST SC-FC SC-ST FC-ST
2. When Connector A is same as Connector B , Default End face A – End face B order in PN: UA PA UP
3. M3(OM3):10G multimode optical fiber can be divided into three categories, 150 M, 300 M, and 550 M according to the maximum transmission distance. The default is 150M
4. M3H:OM3(300) Maximum transmission distance of 300 M
5. Additional instructions for the branch:
When the main diameter cable is not marked, the default is 2.0mm ;
“-X” Other branch length,Next to the branch diameter, continue to add at the end of the model. The length of both sides of the branch is different as -M (custom branch length).
